Installation
(for qualified installers only)
7
© Travis Industries
4060623
100-01170
Packing List
•
Propane Conversion Kit (2 orifices, rate screw)
•
Log Set
•
Remote Control and Wireless Wall Switch
•
Battery Box with 12’ Wire Lead
Additional Items Required
WARNING
: Do not operate the fireplace without the firebacks in place. Failure to install the firebacks
will result in an extreme fire hazard and will void the listing and warranty of this fireplace.
•
Firebacks –Arched (96100166) - Rectangular (96100172) available from Travis Industries
•
36 CF Direct Vent (available only from Travis Industries – see page 23 for part numbers)
•
Gas Line Equipment (shutoff valve, pipe, etc.)
•
6” Needle-Nose Pliers (for removing the glass)
Installation Overview
•
All requirements below must be met.
Non-combustible facing -
see the section "Facing
Requirements"
See the section
"Vent Requirements"
See the section
"Minimum Framing Dimensions"
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
AAAAAAAAAAAAA
Nailing Brackets
The fireplace must be
placed on cement board -
see the section "Fireplace
Placement Requirements"
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
Drywall (or
other
combustible)
10.25"
Min.
See the section
"Mantel Requirements"
See the section
"Hearth Requirements"
See the section "Control Panel
Installation"
NOTE: Control wire is 12' long.
Side
Wall
Figure 3