Finalizing the Installation
(for qualified installers only)
47
© Travis Industries
4060623
100-01170
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 37). Remove the logs and coals (if installed - page 40)
2
Remove the burner (see the illustration below).
Remove the two screws holding the grate
in place and lift it out of the firebox.
Remove the two screws that secure
the burner to the firebox floor.
Slide the burner to the right and up
to remove the burner from the
firebox.
Figure 32
