14 Installation
(for qualified installers only)
© Travis Industries
4140627
100-01353
Nailing Brackets – Extended (Tile Over) Install
The fireplace has nailing brackets on both sides. Secure the fireplace to the framing.
NOTE
: Make sure the fireplace is square and plumb when placed in the framing. Measured corner-to-corner
the fireplace should be square. Use shims to insure the fireplace is square.
Bend the three
nailing brackets
out (each side)
NOTE: if you can not use the
front nailing brackets, an
additional bracket is supplied on
the side that allows the fireplace
to be secured to the floor (bend
tab down and secure).
Secure the fireplace to
the framing using the
nailing brackets
Nailing Bracket
This 5/8" (16mm)
tab acts as a
standoff and helps
center the fireplace
in the framing)
