Traub TNX42, Operating Instructions Manual

Page: 61 / 64

61
10.2016
TNX65/42
Alignment, component installation and commissioning
Switching on the machine
Before switching on the machine, the key-operated switch must be
set to "Production mode" in order to prevent the machine starting
or moving unexpectedly.
Before starting up the machine for the first time, the operator must
ensure that the machine and its safety mechanisms are in perfect
working order. This must also be checked regularly during normal
operation of the machine, but at least whenever it has been repaired
or serviced.
• Switch ON the master switch on the control cabinet!
• Switch ON the NC control on the machine control panel.
• Switch drives ON.
• Open and close working area door
Operability of the door switches must be checked by opening and closing the
working area door. Operation of the machine cannot be commenced until the
safety facilities have responded.
0
I
NC I