666
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Appendix J
J-6
TR-49 Series
Tranzeo Wireless Technologies
# --------------------
# admin.
# --------------------
admin.device_name = TR6Rt
# [STRING.19]
admin.admin_token = admin:default
# [TOKEN]
admin.super_token = recover:recover
# [TOKEN]
admin.led_enabled = Yes
# [Yes | No]
admin.snmp_read_community = public
# [STRING.14]
admin.snmp_sys_location = Location
# [STRING.29]
admin.snmp_sys_contact = Contact
# [STRING.29]
admin.snmp_traffic_format = Counter32
# [Counter32 | Integer64 | Counter64]
admin.block_locator_access = No
# [Yes | No]
admin.auto_config_enabled = No
# [Yes | No] (not used)
admin.auto_config_timeout = 60
# [INT.5-255] unit:second
admin.auto_config_server = 192.168.1.170
# [IP]
admin.auto_config_filename = ""
# [STRING.32] (blank when using
{MAC_ADDRESS}.cfg as default)
# --------------------
# net.
# --------------------
net.network_mode = Bridge
# [Bridge | Router]
net.ip_mode = DHCP
# [Static | DHCP |
PPPoE]
net.ip_address = 192.168.1.100
# [IP]
net.subnet_mask = 255.255.255.0
# [IP]
net.gateway = 192.168.1.1
# [IP]
net.dns1 = 0.0.0.0
# [IP]
net.dns2 = 0.0.0.0
# [IP]
net.domain_name = ""
# [STRING.59]
net.mac_clone_enabled = No
# [Yes | No]
net.mac_clone_address = 000000000000
# [MAC]
net.eth1_mode = Auto
# [Auto | 10Auto | 10Full |
10Half | 100Auto | 100Full | 100Half]
net.eth2_mode = Auto
# [Auto | 10Auto | 10Full |
10Half | 100Auto | 100Full | 100Half]
net.reassociate_on_dhcp = No
# [Yes | No]
net.vlan_enabled = No
# [Yes | No]
net.vlan_id = 0
# [INT.0-4095]
net.reverse_dhcp_block = No
# [Yes | No]
net.shaping_rate = 0
# [INT.0-65535] unit:Kbps
net.shaping_policy = mgmt,icmp
# [bypass,mgmt,icmp,mcast] (bitmap)
# --------------------
# net.router.
# --------------------
net.router.lan_ip_address = 192.168.100.1
# [IP]
net.router.lan_subnet_mask = 255.255.255.0
# [IP]
net.router.allow_ping = Yes
# [Yes | No]
net.router.allow_web = Yes
# [Yes | No]
net.router.web_port = 80
# [INT.1-65535]
net.router.web_timeout = 60
# [INT.0-65535]
net.router.mtu_use_default = Yes
# [Yes | No]
net.router.mtu = 1500
# [INT.500-3000]
