
iiiiiiiii
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Safety Information
iii
TR-49 Series
Tranzeo Wireless Technologies
This equipment has been tested and found to comply with the limits for a digital device
pursuant to part 90 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a Residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication.
Operation in the 4940-4990 MHz band is restricted to the U.S. Operation in this range is
restricted to the Public safety bands. Use of these bands is restricted to entities that meet the
requirements listed the FCC Part 90.20 Public Safety Pool and are properly licensed to
operate a transmitter in the Public Safety band in accordance with Part 90Y of the technical
rules can operate in the 4940-4990 MHz band. FCC regulations state in Part 90, operation in
the 4.9-GHz band requires frequency coordination before the system can be operated.
Operation of this equipment in residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his or her own expense.
The user should not modify or change this equipment without written approval from Tranzeo
Wireless. Modification could void authority to use this equipment.
For the safety reasons, people should not work in a situation which RF Exposure limits be
exceeded. To prevent the situation happening, people who work with the antenna should be
aware of the following rules:
•
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 131.1 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
•
While installing the antenna, do not turn on power to the unit.
•
Do not connect the antenna while the device is in operation.
•
The antenna used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
•
In order to ensure compliance with local regulations, the installer MUST enter the
antenna gain at the time of installation. See
Chapter 3: Wireless Settings
, for details.
FCC Compliance
Safety Information
Operation of this device is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Industry Canada Compliance