303030
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-30
TR-49 Series
Tranzeo Wireless Technologies
Router Mode - PPPoE
From this window you can configure your PPPoE settings.
IP Mode:
You can select to use
Static IP
,
DHCP Client
(dynamic), or
PPPoE
. Note:
If a
PPPoE
server is not
available, the device will try to get an IP for 30
seconds after which it will use the fallback IP address.
The fallback IP is the address that is set in the static
address fields.
WAN:
Enter the information related to the WAN interface: IP
Address, Subnet Mask, Gateway, DNS1, DNS2, and
Domain Name.
LAN:
Enter the information related to the LAN interface: IP
address and subnet mask.
DHCP Server:
Check the box and click
Apply
to enable this feature.
Click on the item (which now appears as a link) to
open the DHCP Server configuration window.
Enable NAT:
Enables NAT. NAT should always be enabled when
using private addressing.
Connect Mode:
Select the connect mode your PPPoE setup requires.
Keep-alive Timeout:
Timeout on the PPPoE connection in seconds. (0-600)
