Transition Networks
SM24TAT2DPA Install Guide
33702 Rev. A
https://www.transition.com
Page
19
of
23
networks. It gives complete visibility into the use of networks
enabling performance optimization, accounting/billing for usage,
and defense against security threats
IEEE 802.1ab (LLDP)
Used by network devices for advertising their identities,
capabilities, and neighbors on an IEEE 802ab local area network
Support LLDP-MED extensions
Web GUI Interface
Built-in switch configuration utility for browser-based device
configuration
CLI
For users to configure/manage switches in command line modes
Dual Image
Independent primary and secondary images for backup while
upgrading
SNMP
SNMP version1, 2c and 3 with support for traps, and SNMP
version 3 user-based security model (USM)
Firmware Upgrade
Web browser upgrade (HTTP/ HTTPs) and TFTP
Upgrade through console port as well
NTP
Network Time Protocol (NTP) is a networking protocol for clock
synchronization between computer systems over packet-switched
Other Management
HTTP/HTTPs; SSH
DHCP Client/ DHCPv6 Client
Cable Diagnostics
Ping
Syslog
Telnet Client
IPv6 Management
Power over Ethernet (PoE)
Port Configuration
Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices
(PDs).
Auto-checking
Check the link status of PDs. Reboot PDs if there is no responses.
Power Delay
The switch provides power to the PDs based on delay time when
PoE switch boots up, in order to protect switch from misuse of the
PDs
.
