Transition Networks
SM24TAT2DPA Install Guide
33702 Rev. A
https://www.transition.com
Page
13
of
23
Installing SFP Modules
You can install or remove a mini-GBIC SFP from a mini-GBIC slot without having to power off the switch.
See the Transition Networks
SFP webpage
for more information on our line of Optical Devices. See the
specific SFP manual for information specificto your SFP module (cautions and warnings, compliance,
installing, fiber cable characteristics, connecting fiber cables, removing an SFP module, DMI/DDMI data,
etc.
Step1.
Insert the module into the switch port. The SFP label must be facing upward on the top port; the
SFP label must be facing downward on the bottom port.
Step2.
Press firmly to ensure that the module seats into the connector.
Figure 8 Installing an SFP Module into a SFP Module Slot
Connecting Console Port
Figure 9 Connecting Console Port
Start a terminal application such as HyperTerminal on the computer. Configure with these parameters
Default Baud rate—115,200 bps
Parity—None
Stop bit—1
Data bits—8
Flow control—none
The default username is “
admin
” and password is “
admin
”.
Refer to the SM24TAT2DPA CLI Reference for Command Line Interface (CLI) command information.
