2.2.2. Place one (1)
washer
on top of each
screw hole
and insert
Size 2 Screws
.
2.2.3. Tighten the
screws
by turning the
Phillips screwdriver
clockwise.
Transition Networks
®
Lan Master TM T8 Assembly Instructions
Version 1.1
Page 8
The Installed Power Supply Printed Circuit Board
Tighten until the screw does not turn
easily anymore. Over-tightening will
damage the circuit board.
Figure 2.2.2
Figure 2.2.3
Satisfi
Design
