1.2 To secure the Circuit Network Board
1.2.1 Align the
screw holes
of the
Circuit Network Board
with the
screw holsters
of the platform.
1.2.2. Place one (1)
washer
on top of each
screw hole
and insert
Size 1 Screws
.
1.2.3. Tighten the
screws
by turning the
Phillips screwdriver
clockwise.
Transition Networks
®
Lan Master TM T8 Assembly Instructions
Version 1.1
Page 5
Figure 1.2.2
Figure 1.2.3
Tighten until the screw does not turn
easily anymore. Over-tightening will
damage the circuit board.
Screw
Holes
Figure 1.2.1
Satisfi
Design
