Transition Networks, Inc.
IONPS-D-R1 User Guide
33707 Rev. A
Page
13
of
50
Description
The Transition Networks IONPS-D-R1 power module can deliver power or provide optional, redundant DC power
for the ION219 chassis.
Power Module Component Identification
The IONPS-D-R1 back panel provides access to the DC Power Input, Power ON LED, Grounding Screw, and fan
exhaust as shown in Figure 3:
1
Fan
2
Functional Ground Terminal (Grounding Screw)
3
Power ON LED
4
Two-position Euro Block (
±
voltage leads)
5
Handle for installing and removing the power module
Figure 3: Component Identification
Note
The IONPS-D-R1 power module must be installed by qualified technical personnel only. Transition Networks
assumes no responsibility for the improper installation, set up or use of these power modules.
The information in this user guide is subject to change. For the most current information, see the online user
guide at
IMPORTANT
All installation and service must be performed by qualified personnel only.
Read and follow all CAUTION and WARNING instructions marked on the product and in this manual.
The IONPS-D-R1 DC power module is intended for installation in restricted access location only.
The IONPS-D-R1, DC power module can replace an existing DC power module or an AC power module in an
ION219 Chassis.
