Transcend Wi-Fi SD, User Manual

Page: 10 / 66

10
Internet Mode
(Connect with iOS/Android device(s) and Internet hotspot)
Internet mode allows you to browse photos and videos stored on the Wi-Fi SD card
on your iPhone or iPad while connected to an Internet hotspot. In this mode, your
device has Internet access, allowing you to upload and share photos online.
Internet hotspot setup:
Before you can use the Wi-Fi SD card in Internet mode, you must be within range of
an Internet hotspot to enter the network details.
1. While connected to the Wi-Fi SD card in Direct Share mode (see previous section
for instructions), launch the Wi-Fi SD App from your iOS/Android home screen.
2. Tap Settings and enter the admin username and password, then tap Internet
Mode .
Note: The default username and password are both admin (all lower case)
3. Enter the SSID and password of the Internet hotspot and tap Done .
General use:
(On your camera)
1. Insert the Wi-Fi SD card into your camera. (For directions on inserting an SD card
into your camera, please see your camera’s user manual.)
2. Follow the steps in the Direct Share section to connect to the Wi-Fi SD card, and
then launch the Wi-Fi SD App.
3. Tap Settings and enter the admin username and password, then tap Switch
Connection Mode .
Note: The default username and password are both admin (all lower case)
4. Tap Internet Mode , then tap Apply .
Note: By default, the Wi-Fi SD card’s wireless network signal will automatically
broadcast in Direct Share mode once the camera is powered on. (To change the
preferred default startup mode to Internet Mode and skip steps 2-4 above, please
see the Settings section for detailed instructions.)
(On your iOS device)
5. Tap Settings , then Wi-Fi .
6. Under Choose a Network … select the SSID of the Internet hotspot you set up in
previously while in Direct Share mode.