13
If the calibration was
not
successful, one of the following error messages will appear.
•
"
Err0
" - The calibration test load or the keyed-in load is larger than the full capacity of
the indicator. Change the calibration test load or check the input data.
•
"
Err1
" - The calibration test load or the keyed-in load is smaller than 1% of the full ca-
pacity of the indicator. Change the calibration test load or check the input data.
•
"
Err2
"
– There is not enough “signal” from the scale platform to complete the calibration
process. Most common causes include incorrect weight sensor wiring, a mechanical
obstruction or a faulty (damaged) load cell.
Take the indicated action to correct the problem, and then perform a new calibration.
Exit calibration mode by moving the slide switch back to its original position. The display will go
through a digit check, and then settle into Normal Operating mode. All front panel keys will now return
to their normal mode of operation.
