6
The indicator features one full duplex RS-232 serial (COM) port, designed for connection to a
computer or a serial printer. The same port may be also used as a simplex, RS-232 port de-
signed for connection to a remote display.
DSUB9 Connector
Pin No.
Wire Name
2
RXD
3
TXD
5
Ground
The indicator has been designed to operate from 9 to 12 VDC and ships with an AC wall adapt-
er designed to operate from the local line voltage. All units ship with the appropriate power plug
for its area of intended use.
Getting Started
1. There is a power
switch on the rear panel of the unit. Flip the switch to the “1” position
to switch on.
After a brief initialization period, the indicator
will revert to a zero (“0”) weight display.
Your indicator is now ready for configuration and calibration.
