WSHP-SVX13C-EN
9
Unit Dimensions
Clearance Dimensions
Access to the unit for service purposes should be provided
at installation. All configurations require clearance (see
Figure 2, p. 9
and
Figure 1, p. 9
) from other mechanical
and electrical equipment (as shown) to enable panel
removal from the unit for service/maintenance ability.
Some local and/or NEC codes require a greater service
clearance than listed below. Check all code requirements
prior to unit installations. The installer is responsible for
compliance with local and NEC code requirements.
Note:
*Units in a free return application will
require more than a 1 inch clearance to
provide proper air flow to the units air-to-
refrigerant coil.
Figure 1.
Clearance dimensions* VSH
20"
36"
20"
20"
20"
20"
UNIT FRONT
LEFT RETURN RIGHT SUPPLY
UNIT FRONT
LEFT RETURN BACK SUPPLY
36"
20"
20"
20"
20"
20"
UNIT FRONT
UNIT FRONT
RIGHT RETURN LEFT SUPPLY
RIGHT RETURN BACK SUPPLY
36"
36"
20"
20"
Figure 2.
Clearance dimensions* VSV
1"
36"
1"
24"
UNIT FRONT
RIGHT RETURN
TOP/BACK SUPPLY
1"
36"
1"
24"
UNIT FRONT
LEFT RETURN
TOP/BACK SUPPLY
