CTV-SVU02A-EN
37
Equipment Settings
Chiller Settings
Table 6
lists the settings that are available as buttons on the Chiller Settings menu screen, along
with their corresponding setting options. The chiller configuration determines which of the settings
appear.
Table 6.
Chiller Settings menu screen: Buttons and available setting options
Buttons
Available setting options
Setpoint Source
• BAS/Ext/FP
• Ext/FP
• Front Panel
Front Panel Control Type
• Chilled Water
• Hot Water
Front Panel Chilled Water Setpoint
(a)
Valid numerical range appears on screen.
Front Panel Hot Water Setpoint
(a)
Valid numerical range appears on screen.
Front Panel Ice Building Command
• Auto
• On
Front Panel Ice Termination Setpoint
(a)
Valid numerical range appears on screen.
Ice to Normal Cooling Timer Setpoint
Valid numerical range appears on screen.
Front Panel Current Limit Setpoint
(a)
Valid numerical range appears on screen.
Front Panel Free Cooling Command
• Auto
• On
Front Panel Base Loading Setpoint
(a)
Valid numerical range appears on screen.
Front Panel Base Load Command
• Auto
• On
Differential to Start
Valid numerical range appears on screen.
Differential to Stop
Valid numerical range appears on screen.
Evaporator Leaving Water Temperature Cutout
Valid numerical range appears on screen.
Low Refrigerant Temperature Cutout
Valid numerical range appears on screen.
Condenser Water Pump Off Delay
Valid numerical range appears on screen.
Evaporator Water Pump Off Delay
Valid numerical range appears on screen.
Evaporator Low Water Flow Warning Setpoint
Valid numerical range appears on screen.
Maximum Capacity Limit
Valid numerical range appears on screen.
Minimum Capacity Limit
Valid numerical range appears on screen.
Check Oil Filter Setpoint
Valid numerical range appears on screen.
Capacity Control Softload Time
Valid numerical range appears on screen.
Current Limit Control Softload Time
Valid numerical range appears on screen.
Current Limit Control Softload Start Point
Valid numerical range appears on screen.
Local Atmospheric Pressure
Valid numerical range appears on screen.
Power-Up Start Delay Time
Valid numerical range appears on screen.
Starter Power Demand Time Period
Valid numerical range appears on screen.
(a) This is an arbitrated setpoint. For an complete explanation of arbitrated setpoints, see
“Setpoint Sources,” p. 38
.
