Trane Technologies Thermo King T-1090 Series Operator'S Manual Download Page 61

Page: 61 / 104

TK 56702-1-OP-EN

Sensor Calibration Check

Manually monitor load temperature.
Report alarm at end of the day.

Engine Failed to Crank

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

High Engine Coolant Temperature

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Low Engine Oil Pressure

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Engine Failed to Start

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Cooling Cycle Check

Manually monitor load temperature.
Report alarm at end of the day.

Heating Cycle Check

Manually monitor load temperature.
Report alarm at end of the day.

Cooling Cycle Fault

The indicated zone is not longer able to
operate and has been shut down.

Heating Cycle Fault

The indicated zone is not longer able to
operate and has been shut down.

Alternator Check

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Check Refrigeration Capacity

Manually monitor load temperature.
Report alarm at end of the day.

Pretrip or Self Check Abort

Report alarm at end of the day.

Check Oil Pressure Switch

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Refrigeration Capacity Low

The indicated zone is not longer able to
operate and has been shut down.
Repair immediately.

Check Engine RPM

Report alarm at end of the day.

Check Run Relay Circuit

If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.

Summary of Contents for Thermo King T-1090 Series









































































































Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands

Trane Technologies Thermo King T-1090 Series, Operator'S Manual

Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands