Trane Technologies Thermo King T-1090 Series Operator'S Manual Download Page 56

Page: 56 / 104

TK 56702-1-OP-EN

configured for electric to diesel autoswitch, it automatically starts and runs
in diesel mode if an electric shutdown occurs.

Alarm Code Notification

The Alarm Icon used in previous Thermo King controllers has been
incorporated. If a Check Alarm condition occurs, the Alarm Icon will appear
in the display as shown (

Figure 62, p. 56

Figure 62.

Alarm Icon

Clearing Alarm Codes

Most alarm codes can be cleared conventionally from the Alarm Menu using
the CLEAR key.

The following control and display sensor alarm codes can only be cleared
from the Maintenance Menu or Guarded Access Menu:

•

Alarm Code 03 Check Control Return Air Sensor

•

Alarm Code 04 Check Control Discharge Air Sensor

•

Alarm Code 74 Controller Reset to Defaults

The following alarm codes clear automatically:

•

Alarm Code 64 Pretrip Reminder - Clears when a Pretrip Test is
performed.

•

Alarm Code 84 Restart Null - Clears when the unit is no longer in a restart
null due to a Prevent Alarm.

•

Alarm Code 85 Forced Unit Operation - Clears when the unit is no longer
running in a forced mode due to a Prevent Alarm.

•

Alarm Code 91 Check Electric Ready Input - Clears automatically when
the unit starts running.

•

Alarm Code 92 Sensor Grades Not Set - Clears when the sensor grade is
changed from 5H.

Summary of Contents for Thermo King T-1090 Series









































































































Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands

Trane Technologies Thermo King T-1090 Series, Operator'S Manual

Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands