Trane Technologies Thermo King T-1090 Series Operator'S Manual Download Page 30

Page: 30 / 104

TK 56702-1-OP-EN

otte

e:: With extremely cold ambient temperatures, it may take up to 15

seconds for the display to appear on initial startup.

Figure 13.

ON Key

The startup screen shown (

Figure 14, p. 30

) appears while communications

are established and the unit prepares for operation.

Figure 14.

Startup Screen

If More Than One Language is Enabled

If more than one language has been enabled, a prompt will appear to allow
the desired language to be chosen as shown (

Figure 15, p. 31

). Only

languages enabled from the Guarded Access Menu are available. If a
different language is desired, press the NO key.

Summary of Contents for Thermo King T-1090 Series









































































































Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands

Trane Technologies Thermo King T-1090 Series, Operator'S Manual

Search results

Summary of Contents for Thermo King T-1090 Series

Reviews:

Related manuals for Thermo King T-1090 Series

Brands by name

Popular brands