Traid Triumph 1000, Operating And Maintenance Manual

Page: 7 / 67

7 TRIAD Boiler Systems, Inc.
West Chicago, IL
www.triadboiler.com
The TRIUMPH SS series boilers place no limit on the return water temperature, and reach the highest
performance when the return temperature is lower than 135°F. At higher temperatures (as with any
condensing boiler)
there is no water vapor in the flue gas, so it is not possible to recover any latent heat
. The
efficiency of Triumph SS boilers is rather high even with traditional-temperature heating systems.
READ AND SAVE THESE INSTRUCTIONS FOR REFERENCE . These manual and associated documents are to
be kept with the boiler and in legible condition for the life of the boiler.
This manual will refer to the burner manual (Powerflame or Weishaupt) when appropriate. A double asterisk
(**) is used to indicate that your boiler manual should also be checked for information on the topic being
covered unless otherwise noted. In addition to the boiler and burner working together, there are controls,
switches, valves, and other components on your boiler assembled specific to each end user. A list of exact
components, and information about them, are appended to this manual. All of these documents and devices
work together to safely operate your boiler.
Documents Unique to your boiler
Triad documents are created unique to each boiler and are appended to this manual
Document # of pages Page #/Location

Specification sheets 4 Appendix 1

Ratings and dimension drawing, 1 Appendix 2

Recommended spare parts, 1 to 3 Appendix 3

List of component manuals 1 to 4 Appendix 4

ASME data reports 1 to 12 pages Appendix 6

MSDS Information (If supplied) 0 to 9 Appendix 7

Wiring drawing(s) can be large format Last
Supplimentary Manuals:
This manual is intended to be used in conjunction with other documents.

Burner manual, and manuals that comes with the burner. Appendix 10

Manuals for other components supplied with the boiler. Appendix 11
NOTE: Warranty validation/Start-up report information sheet must be filled out and return to TRIAD within
three weeks of when the burner is first turned on and within two months of shipment of boiler to maintain
your warranty. Also note that boil-out procedures, a slow initial warm up, and proper water treatment are
required to maintain your warranty.