10
Once all cables are connected, follow these steps
to install the interface box inside the vehicle.
a.
Attach the two mounting brackets to the
sides of the unit using three #2-56 screws.
Simply screw these fasteners into the vent
slots (see Figure 16).
b.
Secure the brackets to the mounting surface
using appropriate 1/4" fasteners (not
supplied).
NOTE:
Be sure to leave enough slack in the
connecting cables (service loop) for easy serviceability.
Figure 16: Interface Box Mounting
Bracket
#2-56 x 1⁄4"
Screws (x3)
1⁄4" Fasteners (x4)
(not supplied)
To avoid overheating, do not block the upper
vents of the interface box.
IMPORTANT!
Mount the Interface Box
8
