14
Follow these steps and refer to the flowchart in
Figure 23 to set up the system for ExpressVu.
a.
Press any button on the interface box front
panel.
b.
At “Service= DIRECTV?,” press CHANGE
until the display shows “Service=
ExpressVu.” Then press ACCEPT.
c.
At “Mode= Dual-Sat,” press CHANGE until
the display shows the desired mode. Then
press ACCEPT.
You may select any one of the following
ExpressVu modes:
Dual-Sat
Select this mode if you wish to receive ExpressVu
programming from the 91 and 82 satellites.
Single-Sat
Select this mode if you wish to receive ExpressVu
programming from just the 91 satellite.
d.
Follow the instructions in Step 11 on
to set up your receiver(s).
Mode
Satellites Tracked
Dual-Sat
91 and 82
Single-Sat
91
MODE= DUAL-SAT?
CHANGE ACCEPT
Press any
bu
tton
to
b
egin.
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE ACCEPT
RESTARTING ANTENNA
Press CHANGE
u
ntil
desired mode displays;
then press ACCEPT.
MODE= SINGLE-SAT?
CHANGE ACCEPT
INSTALLING EXVU SATS
Displays satellites
installed for the
selected mode
SERVICE= EXPRESSVU?
CHANGE ACCEPT
SERVICE= DISH?
CHANGE ACCEPT
Figure 23: ExpressVu Setup
Set Up the System
10
Option 3 - ExpressVu
