Operator’s manual for the Pentruder MD1 Modular Drill System with MDU9 Modular Drive Unit - Original instructions
Page 7
2.4
Rig for MD1 Drill System with MDU9 - 70 mm column system
2.4.1
Standard modules for MD1 drill rig with MDU9 - 70 mm column system
•
BE1 Base plate fixed / BE2 adjustable quick disconnect coupling /
BE6 Base plate with cut outs, fixed adjustable coupling
•
CN Columns F/M-70 Female / Male coupling, extendable, 0.5 / 1.2 / 1.5 m
•
CN Columns F/J-70 Female / Jack screw, 0.5 / 1.2 / 1.5 m
•
CN Column Female / plastic cap, 2 m (only extendable at the bottom)
•
ET70 Eccentric bolt for CN columns
•
RST-CN-M Rear support for 70 mm column with male coupling, 2.1-3.2 m - accessory
•
RST-CN-U Rear support for 70 mm column universal, fastened directly on the column,
2.1-3.2 m - accessory
•
CE1-70 Carriage for 70 mm columns
•
FE1 Friction clutch
•
PD1/PD2 Pivoting head - accessory
•
HK-1 Hand crank for CER and CEG carriages and MDU9 - accessory
2.4.2
Base plates for CN columns
The BE1, BE2 and BE6 base plates are used with CN columns, TTFF or JTFF tracks.
On BE2 the conical quick coupling can be swiveled sideways in increments of 5° for angular drilling
operations. The conical quick coupling on BE1 is fixed. The base plate BETC has a top mount fixed conical
quick coupling.
The columns fitted on the conical quick release coupling can be swiveled around its own axis, and great
flexibility is offered to simplify set-up.
BE1
BE2 with swiveled column coupling
BE6
