Operator’s manual for the Pentruder MD1 Modular Drill System with MDU9 Modular Drive Unit - Original instructions
Page 13
3
Safety instructions
3.1
Safety instructions which are used in this operator’s manual
Note!
This sign indicates technical specifics and methods which will facilitate the
job.
!
Important!
Here we inform about risks connected with use of the machine, and, if the
safety precautions are not respected, can result in damage to property and
persons in close proximity to the machine.
WARNING!
In these we inform about risks connected with use of the machine, and, if the
safety precautions are not respected, can result in serious injury and even to
fatal injuries to persons in close proximity to the machine.
3.2
Intended use of the drilling machine
WARNING!
The drilling machine may only be used for core drilling in concrete, masonry
or similar materials. Other use is non-intended and therefore to refrain from.
WARNING!
Before drilling is commenced, make sure that;
•
There are no power lines, gas or oil pipes in the way.
•
The statics of the building are not imperiled because of the drilled holes.
•
No damage is done on other side of the wall when drilling through the wall.
Other use is non-intended and therefore to refrain from. For maximum drill bit size, see Technical Data.
This drilling machine may not be used before the operator is fully educated by our sales distributor in
handling the machine. It is the obligation of the buyer to make sure that the operator really has received the
information necessary to operate and take care of the machine in a correct and safe way. Incorrect
handling can lead to serious or even fatal injury to the operator and persons in proximity to the machine.
Tractive AB is not responsible for damage on property or persons whether they originate from incorrect
handling or deficient maintenance or as a consequence from not checking the machine for damage and/or
defects before taking it into use.
The following safety instructions are important to know and follow.
3.3
Not intended use of the drill rig
This drill rig may not be used for:
•
any kind of stirring jobs, for instance stirring of paint of similar.
•
drilling in soil, for instance drilling holes for poles.
•
free hand drilling.
WARNING!
The drill rig may not be used on loose masonry as the anchors may come
loose.
