59
Preparation after Storage
Taking this vehicle out of storage and cor-
rectly preparing it will ensure many miles and
hours of trouble-free riding. The manufacturer
recommends the following procedure:
1. Clean the vehicle thoroughly.
2. Clean the engine. Remove the cloth
from the exhaust system.
3. Check all control wires and cables for
signs of wear or fraying. Replace if
necessary.
4. Change the engine oil and filter.
5. Change front differential oil and tran-
saxle oil.
6. Check the coolant level and add prop-
erly mixed coolant as necessary.
7. Charge the battery; then install. Con-
nect the battery cables making sure to
connect the positive cable first
.
8. Check the entire brake systems (fluid
level, pads, hoses, etc.), all controls,
headlights, taillight, brake light, and
headlight aim; adjust or replace if nec-
essary.
9. Check the tire pressure and tire condi-
tion. Inflate to recommended pressure
as necessary.
10. Tighten all nuts, bolts, cap screws, and
screws making sure all calibrated nuts,
cap screws, and bolts are tightened to
specifications.
11. Make sure the steering moves freely
and does not bind.
12. Check the spark plugs. Clean or replace
as necessary.
13. Check the air filter and the air filter
housing. Clean or replace as necessary.
CAUTION
Before installing the battery, make sure
the ignition switch is in the OFF position.