TR-Electronic LE-25, User Manual, Page: 83 / 88

Printed in the Federal Republic of Germany

TR-Electronic GmbH 2020, All Rights Reserved
06/15/2020 TR - ELE - BA - DGB - 0030 - 01 Page 83 of 88
Supported Event Codes
EventCode
Device status
(Index 0x0024)
Type Error message Cause / Remedy
0x1800 0x04 E High priority error
Check installation for interfering
sources (e.g. vibration,
temperature, strong magnetic
fields.
0x1801 0x04 W Memory fault
Restart system, try writing
parameter again.
0x1802 0x02 W
Preset value out of
range
Check manual for permitted values
for preset. Check, if preset value
within the measuring range.
0x1803 0x02 E
Driver current limit
exceeded (100mA) Check installation for short circuit
on DI/DO or C/Q line.
0x1804 0x02 E
Driver enters thermal
shutdown
Check power consumption of the
system and clear external sources
of heat.
0x1805 0x02 W Position Warning
Check bits of PDin 2^0 'Error
Status' and their meaning in the
manual.
See bit 6
“Other faults”, page 87
0x1806 0x01 W Intensity Warning
Check bits of PDin 2^0 'Error
Status' and their meaning in the
manual.
See bit 0/4
“Other faults”, page 87
0x1807 0x02 W
Temperature limits
exceeded
Check manual for temperature
limits.
See bit 1
“Other faults”, page 87
0x1808 0x02 W Max. Speed exceeded
Configured value of Maximum
Speed (Index 84) has been
exceeded.
See bit 5
“Other faults”, page 87
Continuation, see following page