background image

Assembly Instructions  |  ILM-E Servo Kits

7

Edition 10/2021 EN

Introduction

1.11 Environmentally-friendly disposal

DANGER

Danger of death by powerful magnetic fields

The life of persons with passive or active implants such as pacemakers, defibrillators, insu-

lin pumps etc. is put at risk if they stand in the vicinity of the ILM-E servo kit.

 

Make sure that no persons who could possibly be affected by powerful magnetic fields 

are able to approach the ILM-E servo kit. They must maintain a safe distance of at least 

2 m.

 

Instruct persons in the vicinity of the potential risk.

The ILM-E servo kits must not be disposed of in the residual waste bin.

 

In Germany, metal and plastic components should be disposed of at the local recy-
cling centre. The national regulations in other EU states should also be followed.

 

In Germany, electrical components should be disposed of in accordance with the 
Electrical and Electronic Equipment Act (ElektroG). In other EU states, the na-
tional implementation of the Waste Electrical and Electronic Equipment Directive 
2002/96/EC (WEEE) should be followed.

 

The regulations and statutory requirements in your own country concerning disposal 
should also be followed.

1.12 Trademarks

 

LOCTITE® is a trademark of Henkel.

 

Kapton® is a trademark of DuPont.

Summary of Contents for ILM-E

























Reviews: