TQ ILM-E, Assembly Instructions Manual

Page: 20 / 24

Assembly Instructions | ILM-E Servo Kits
20 Edition 10/2021 EN
Assembly
Fig. 9: Final stator position
◀ Dowel pin
◀ Dowel pin
— Allow the housing to cool to room temperature.
— Once the housing has cooled to room temperature, check that the stator is seated
firmly and without gaps in the housing.
5.2 Rotor
WARNING
Danger of eye injury and skin irritation by adhesives
The adhesives used for bonding can cause severe eye injuries and skin irritations.
► Wear safety goggles to protect your eyes and wear safety gloves until you have fin-
ished installing the ILM-E servo kit.
► Read and follow the safety data sheets provided with the adhesive.
5.2.1 Tools and equipment required
— Non-magnetic tool
— Bonding adhesive for rotor (e.g. LOCTITE 648)
— Kapton tape
— Cleaning agents
— Lint-free cloths
— Antistatic coat
— ESD grounding wrist strap
— Safety goggles
— Protective gloves