Assembly Instructions | ILM-E Servo Kits
5
Edition 10/2021 EN
Introduction
—
Concentrated windings for low losses
—
Thermally-optimized actuator design thanks to structural integration
—
Drive systems developed to optimize weight and installation space on the basis of
load profile analyses
—
High bandwidth and minimal harmonics for optimal control quality
1.3 Revision index
Manual
Edition
Language
ILM-E Servo Kit Assembly Instructions
10/2021, initial version
EN
Table 1: Revision index
1.4 Supplementary documents
Installation drawings and data sheets are available for different sizes on our website.
1.5 Explanation of the symbols used
►
This symbol indicates an action to be taken.
—
This symbol indicates a list.
1.6 Training
The manufacturer offers training courses on the general handling of the ILM-E servo kits.
Please contact the
TQ-Drives division of TQ-Systems GmbH
as required.
1.7 Declaration of incorporation
The ILM-E servo kits are regarded as "partly-completed machinery" as defined in the
Machinery Directive 2006/42/EC. The declaration of incorporation is an integral part of
this installation manual (see section 6 on page 23).
1.8 Serial number
—
The serial number is shown on the label attached to the stator.
—
The serial number is shown on the label attached to the rotor.
NOTE
The label on the rotor must be removed without leaving any residues before the rotor is
installed.
