manualshive.com logo in svg

TPS WP-90, Handbook, Page: 5 / 48

Share
Download
TPS WP-90 Handbook Download Page 5

Page 5

¬

Press to record readings into memory. See section 10.1.

Also used at turn-on to select pH6.88 or pH7.00 as the primary pH buffer
(section 16).

-

Press to show or hide the date and time. See section 15.2.

®

Press to start or stop automatic logging. See section 11.

Alternatively, press to transmit current reading plus date and time to the
optional RS232 port. See section 12.2.

¯

Press to zero Relative mV, when Relative mV mode is selected (section 7).

°

Press to access the user-friendly menu system which makes the 

WP-90

 easy

to operate.

±

 and 

³

 

The 

 and 

 keys are used for calibrating temperature readout (section

8.1), setting the clock (section 15.1), setting the automatic logging period
(section 11), and displaying GLP information (section 9.1).

The 

 key is also used to initialise the 

WP-90

 at turn-on. See section 17.

²

Switches the 

WP-90

 on and off.

´

Display

32 character alpha-numeric display with user-friendly menu and prompting
system. Shows Specific Ion/pH/mV and Temperature simultaneously. Date
and time can also be displayed.

Summary of Contents for WP-90

















































Reviews:

No comments