Page 29
11. Automatic Datalogging
The
WP-90
can automatically log readings. First the logging period must be
programmed, then automatic logging can be started and stopped as required.
1.
Select the Notepad menu (
→
→
F2:Notepad
).
2.
Select
F4:Prog.
from the menu.
The display should now look like this…
→
→
00
←
←
F1
:
Min
F2
:
Sec
↑↑↓↓
:Period
F3
:
Hr
3.
Use the
and
keys to set the period at which the
WP-90
will
automatically log records.
4.
When the logging period has been correctly set, select whether this period is
in minutes, seconds or hours.
Press
to save the period as minutes.
Press
to save the period as seconds.
Press
to save the period as hours.
For example, if the period is set to
05
, followed by
, then the
WP-90
will automatically log a record every 5 seconds.
5.
If the optional RS232 port is fitted, the
WP-90
will ask if the records are to
be logged into the Notepad, or sent directly to the RS232 port.
Press
to log records into the Notepad (maximum of 150 readings).
Press
to send records directly to the RS232 port.
6.
The automatic logging function is now programmed, and can be started and
stopped as required.