manualshive.com logo in svg

TPS smartCHEM-D, Manual, Page: 50 / 60

Share
Download
TPS smartCHEM-D Manual Download Page 50

 

50

15. Initialising the smart

CHEM

-D  

If the calibration settings of the 

smart

CHEM

-D 

exceed the allowable limits, the unit may need to 

be initialised to factory default values. This action may be required if a sensor is replaced. 

Initialising the unit will reset all user setups to their factory default values and erase all readings 
logged in memory. 

Ensure that any valuable data has been noted or downloaded and saved 

before proceeding.

 

To initialise the 

smart

CHEM

-D

… 

1. Select Initialise from the Setup menu (

 

→

→

 F4:Setup 

→

→

 F5:Initialise

) 

2. The 

smart

CHEM

-D

 now asks if you are sure that you wish to initialise ALL parameters… 

Initialise 
 
F1:All 
 

Press 

 to initialise ALL parameters, reset all factory default settings and clear the memory. 

3. When returning the meter to normal display mode, note that the decimal points have been 

replaced with a “ 

∗∗

 ”, to indicate that each parameter requires re-calibration. 

16. Instrument firmware version number 

If you need to contact TPS for any further technical assistance, the version number of your 

smart

CHEM

-D 

firmware may of benefit to us. The version number is displayed by the 

smart

CHEM

-D 

at turn-on. 

 
 

Summary of Contents for smartCHEM-D





























































Reviews:

No comments