TPS smartCHEM-D, Manual, Page: 49 / 60

49
14. Setting the Clock
1. Select the Clock Set-up menu (
→ →
F4:Setup
→ →
F2:Clock
)
2. The display now shows the current time, for example…
Time is now 12:00
Enter Time 12:00
3. Use the Numeric Keypad to enter the current time, then press .
Alternatively, press menu to quit and retain the current setting.
4. If you pressed above, the display will now show the current date, for example…
Date is now 04/09/01
Enter Date 04/09/01
dd/mm/yy
5. Use the Numeric Keypad to enter the current date, then press .
Alternatively, press menu to quit and retain the current setting.
Notes
1. The smart CHEM -D tests that a valid day of the month is entered. If an invalid date is entered
(eg. 31/02/2001), the smart CHEM -D beeps and displays the message “
Invalid Date
”.
The meter then returns to the clock setting screen so that the correct date can be entered.
2. The smart CHEM -D also tests for leap years.