TPG BizPhone Cordless W60P IP DECT Phone User Guide
P a g e
|
9
Customising Your Phone
General Settings
Turning handset On/Off
To turn the headset on:
Press
. The LCD screen lights up.
Place the handset in the charger cradle.
The handset can also be tuned on automatically when inserting the battery to the handset.
To turn the headset off:
Long press
when the handset is idle.
Locking/Unlocking Keypad
You can lock the handset keypad to prevent keys from being accidentally pressed.
To lock the keypad:
Long press when the handset is idle until the LCD screen prompts “Keypad Locked, Press and
hold „#‟ to unlock!”.
The keypad is locked and the
icon appears on the status bar.
You can still answer or reject incoming calls as usual. You can also end the answered call by pressing
.
To unlock the keypad:
Long press again until the LCD screen prompts “Keypad Unlocked”.
The keypad is unlocked and the
icon appears from the idle screen.
Note:
If the keypad is locked, only the emergency numbers can be dialled out. You must enter the emergency number continuously
and completely. To place emergency calls, you should configure the emergency numbers in advance.
Backlight
Handset backlight status in the charging state or out of the charging state can be configured independently of each
other. If enabled, the backlight is always on. Otherwise, the backlight is turned off after the handset is idle for a period
of time. But the backlight is automatically turned on when an incoming call arrives, a key is pressed or the status of
handset changes. You can disable the backlight to save power.
To configure the backlight on your phone:
1.
Press
to enter the main menu.
2.
Press
Settings
->
Display
->
Display Backlight.
3.
Press or to select the desired value from the
In Charger
field.
4.
Press or to select the desired value from the
Out Of Charger
field.
5.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
