TPG BizPhone Cordless W60P IP DECT Phone User Guide
P a g e
|
23
3.
Press
TRAN
key or the
Transfer
soft key to complete the transfer after the party answers the call.
Call Waiting
You can enable or disable call waiting on the phone. If the call waiting is enabled, you can receive another call while
there is already an active call on the phone. Otherwise, another incoming call is automatically rejected by the phone
with a busy message when there is an active call on the phone. You can also enable or disable the phone to play a
warning tone when receiving another call.
To configure call waiting on your phone:
1.
Press
to enter the main menu.
2.
Select
Call Features
->
Call Waiting.
3.
Press or to select the desired value from the
Status
field.
4.
Press or to select the desired value from the
Tone
field.
5.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
Note:
Call Waiting is local to the phone, and may be overridden by the admin settings. For more information, contact
your system administrator.
Three-Way Conference
The W60P IP DECT Phone supports up to 3 parties (including yourself) in a conference call.
To set up a conference call:
1.
Place a call to the first party.
2.
Press the
Options
soft key, and then select
Conference
.
3.
Do one of the following:
-
Enter the number of the second party you want to add to the conference.
Press
,
,
or the
Conf.
soft key to dial out.
-
Press the
Directory
soft key, and select the desired contact.
Press
,
,
or the
Call
soft key.
If both the office number and the mobile number of the contact are stored, select the desired number
and press
,
or
to dial out.
4.
When the second party answers the call, you can consult with him or her before adding to the
conference.
5.
Press the
Conf.
soft key to join all parties in the conference.
