Ó
Copyright 2015
72
User Manual: TP 235 MOBILE / TP 275 MOBILE from date 01.12.2016
16
Extra equipment
16.1
TP CHIP KIT
The TP CHIP KIT includes four sliver breakers which are fitted to the knife opening in the disc and a
facing plate, which is fitted to the top in the disc housing.
The TP CHIP KIT provides significantly improved wood chip quality. If woodchip quality is not an
important factor, it will be beneficial if the facing plate and the sliver breakers are removed. This
will increase the capacity of the wood chipper and save fuel.
It is also recommended that the facing plate and the sliver breakers are removed when chipping
wet wood with a lot of needles/leaves. This ensures good ejection.
Replacing the facing plate
1.
Open the disc housing as described in chapter 7.
2.
Remove the facing plate (1), which is fitted with three bolts in the side of the top disc
housing.
3.
Replace the facing plate (1) if it is worn.
4.
Fit the new facing plate (1).
5.
Finally, close the disc housing as described in chapter 7.
