Ó
Copyright 2015
76
User Manual: TP 235 MOBILE / TP 275 MOBILE from date 01.12.2016
3.
Pull the wheel (4) out of the wheel carriage (6) so that it lands on the ground. The wheel is
now ready to replace the punctured or damaged wheel on the wood chipper.
Wheel change
1.
Use the jack to lift wood chipper using one of the two lifting points (7) depending on which
wheel is to be replaced. Always put blocks against the wheel until you change the wheel!
2.
Remove the wheel bolts (8) that secure the wheel to the wheel axle.
3.
Now replace the wheel with the spare wheel and secure the spare wheel using the wheel
bolts (8). Tighten the wheel bolts to 120 Nm.
4.
Finally, fit the punctured/damaged wheel inside the spare wheel holder.
