Ó
Copyright 2015
User Manual: TP 235 MOBILE / TP 275 MOBILE from date 01.12.2016
27
Closing the revolving roller
1.
Close the revolving roller against the inside closing stop (1).
2.
Fit the springs on the revolving roller's spring holder (2).
3.
Using a flat fibre strap (3), pull the springs one after another, by placing the strap around
the spring's eyes and pulling on both ends of the fibre strap (the strap is a part of the TP
TOOLBOX). Once the spring has been pulled in across the spring holder on the in-feed (4),
release one end of the fibre strap and then pull it out of the spring's eye by pulling the
other end of the fibre strap. The springs can then slide into place in the spring guides.
4.
Close the cover above the in-feed and lock securely using the external catches.
