TP-Link VIGI NVR1008 User Manual Download Page 44

Page: 44 / 150

Chapter 2

Configure Your Network Camera

2. Select a channel and configure the following parameters. Click

Save

Smart Coding

Enable Smart Coding to improve compression performance.

Resolution

Specify the resolution of the video stream. The screen displays images

more clearly when the resolution increases.

Video Frame Rate

Specify the frame rate of videos. The video is more fluent when the rate

increases.

Bite Rate Type

Select a type of bit rate.

VBR: The bit rate changes with the image within Maximum Bit Rate.

CBR: The bit rate is Maximum Bit Rate all the time.

Video Quality

When VBR selected as the bit rate type, set the video quality as high,

medium, or low.

Maximum Bit Rate

When VBR selected as the bit rate type, specify the upper limit of bit

rate.

When CBR selected as the bit rate type, specify the bit rate.

Video Encoding

Select the encoding type of the stream. Compared with H.264, H.265 is

improved in reducing the file size and saving the bandwidth.

3. (Optional) If you also want to apply the stream settings to other channels, click

Copy to Other

Channels

and select the channels. Click

Save

Summary of Contents for VIGI NVR1008























































































































































Search results

Summary of Contents for VIGI NVR1008

Reviews:

Related manuals for VIGI NVR1008

Brands by name

Popular brands

TP-Link VIGI NVR1008, User Manual

Search results

Summary of Contents for VIGI NVR1008

Reviews:

Related manuals for VIGI NVR1008

Brands by name

Popular brands