98
Chapter 6
Events and Alerts
6. 5 Video Signal Loss
Alarm actions will be triggered when the NVR cannot get video signal from the camera and display
signal on the Live View screen. You can customize the triggered actions for different cameras. Follow
the steps below to finish the configuration.
1. Right click on the Live View screen and click
Settings
in the pop-up main menu, then go to
Event
>
Exception Detection
>
Video Signal Loss
.
The alarm actions are as follows:
Screen Prompt
A warning sign
in the lower right corner of the monitor screen.
Enable it to check the event type and time.
Pop Alarm Screen
The channel in Live View will be in full screen when the NVR detects the
signal loss.
Buzzer
The buzzer on the NVR will beep when the NVR detects the signal loss.
Recording Linkage
The channels you select for recording linkage will start recording when
the current channel detects the signal loss.
