TP-Link VIGI NVR1008 User Manual Download Page 101

Page: 101 / 150

Chapter 6

Events and Alerts

Buzzer

The buzzer on the NVR will beep when line crossing detection is

triggered.

Recording Linkage

The channels you select for recording linkage will start recording when

the current channel detects the object crossing the customized line.

Pop-up Alarm

Screen

The channel in Live View will be in full screen when line crossing

detection is triggered.

White Light Alarm

(Only supports camera models with light alarm) A camera with light

alarm flashes when line crossing detection is triggered.

Audible Alarm

(Only supports camera models with audible alarm) The buzzer on the

camera will alarm when line crossing detection is triggered.

5. Set the alarm schedule. Click

Apply

6. Click

Save

to save the settings.

7. (Optional) Click

Copy to other channels

, select the channels and click

Yes

if you want to apply the

settings to other channels. Then click

Save

Line Crossing Detection

to save the settings.

Summary of Contents for VIGI NVR1008























































































































































Search results

Summary of Contents for VIGI NVR1008

Reviews:

Related manuals for VIGI NVR1008

Brands by name

Popular brands

TP-Link VIGI NVR1008, User Manual

Search results

Summary of Contents for VIGI NVR1008

Reviews:

Related manuals for VIGI NVR1008

Brands by name

Popular brands