manualshive.com logo in svg

TP-Link VIGI NVR1008, User Manual, Page: 78 / 150

Share
Download
TP-Link VIGI NVR1008 User Manual Download Page 78

74

Chapter 4

 Recording and Storage

All

Display the locked and unlocked files.

8.  Click 

Search

.

9.  Select the files you need and click 

Fast Export

 or 

Compatible Export

.

Fast Export

 

The export process is faster than that of compatibility mode.

Compatible Export

The exported recordings will be transcoded to H.264 which is compatible 

with various digital products.

10.  Select the folder or create a new folder and click 

Start Backup

 to export the files to your external 

storage device.

4. 6  Backup Recordings

Backup allows you to copy all the recordings stored in your NVR to the external hard drive. You can view 
these recording files when installing the hard drive on another NVR. 

 Caution: 

The data stored in your external hard drive will be lost if you choose to back up the recordings. It is 
recommended to back up the data in your external hard drive before you start the backup process.

To back up the recordings, follow the steps below:
1.  Right click on the Live View screen and click 

Settings 

in the pop-up main menu.

Summary of Contents for VIGI NVR1008























































































































































Reviews:

No comments