TP-Link TL-WR844N User Manual Download Page 15

Page: 15 / 147

Chapter 2

Connect to the Internet

Note:

If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to menu

Tools

Internet Options

Connections

LAN Settings

, in the screen that appears, untick the

Using Proxy

checkbox,

and click

Follow the

Quick Setup

to set up the internet connection.

Enjoy!

For wireless devices, you may have to reconnect to the wireless network if you

have customized the SSID (wireless name) and password during the configuration.

2 2 2 WISP Mode

This mode connects to the ISP network wirelessly in areas without wired service.

Router

Devices

Public Wi-Fi

Connect the power adapter to the router and power on the router.

Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (wireless name) and password printed on the bottom label of the router.

Summary of Contents for TL-WR844N




















































































































































Search results

Summary of Contents for TL-WR844N

Reviews:

Related manuals for TL-WR844N

Brands by name

Popular brands

TP-Link TL-WR844N, User Manual

Search results

Summary of Contents for TL-WR844N

Reviews:

Related manuals for TL-WR844N

Brands by name

Popular brands