30
Chapter 4
Configure the Access Point
WDS Repeater Mode
• Wireless Name of Root AP
- Enter the SSID of AP that you want to access or click
Survey
to find the network you want to connect to.
• MAC Address of Root AP
- Enter the MAC address of AP that you want to access.
• Mode
- Select the desired wireless mode. The options are:
• 11b only
- Only 802.11b wireless stations can connect to the device.
• 11g only
- Only 802.11g wireless stations can connect to the device.
• 11n only
- Only 802.11n wireless stations can connect to the device.
• 11bg mixed
- Both 802.11b and 802.11g wireless stations can connect to the
device.
• 11bgn mixed
- All 802.11b, 802.11g and 802.11n wireless stations can connect
to the device.
• Channel Width
- Determines the channel width to be used. It is unnecessary to change
the default value unless required.
• Enable Wireless Radio
- Select or deselect this check box to allow or deny wireless
stations to access the device.
Click the
Survey
button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot
the device.
Downloaded from
