39
¾
Notify Type
: You can select the notify type among DHCP, Static IP, and PPPoE. When the
network settings related to the chosen notify type are changed, an e-mail notification will be
sent to inform you of the updated network information of the camera.
¾
SMTP Server Name
: Type the SMTP server name up to 64 characters, or the IP address of
the SMTP server.
¾
SMTP Server Port
: You can set port number from 1~65535 according to your mail server.
The default value is 25.
z
SSL
: It is Security setting. Checking
SSL
box if the mail server you use has security
restriction.
)
Note:
If you use g-mail as your mail server, you should set 587 as your port number and check
SSL
box.
¾
Authentication
: Select the authentication required when you send an email.
z
Off
: Select this if no authentication is necessary when an email is sent.
z
On
: If authentication is necessary when an e-mail is sent, there are
SMPT
,
POP before
SMPT
or
both
three options.
z
SMTP
: Select this if SMTP authentication is necessary when an e-mail is sent.
z
POP before SMTP
: Select this if POP before SMTP authentication is necessary when an
e-mail is sent. If this option is selected, the
IP Notification
page will be different as
following figure shown.
