61
¾
SMTP
: Select it if SMTP authentication is necessary when an e-mail is sent.
¾
POP before SMTP
: Select if POP before SMTP authentication is necessary when an e-mail
is sent.
)
Note:
When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
z
POP server name
: When the
POP before SMTP
is selected in Authentication, type the
POP (receiving mail) server name up to 64 characters, or type the IP address of the POP
server. This setting is necessary when the SMTP server which sends e-mails performs
authentication using the POP user account.
z
User name, Password
: Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
¾
Recipient e-mail address
: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
¾
Administrator e-mail address
: Type the Administrator e-Mail address up to 64 characters.
This address is used for reply mail and sending system messages from the SMTP server.
¾
Subject
: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is
sent according to the alarm detection when Alarm sending of the alarm tab is set to On, the
characters standing for the sensor type added to the subject.
¾
Message
: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2
characters.)
