TL-SC3000
3GPP Surveillance Camera
50
With EagleEyes (For WinCE New version) installed
STEP1: Go to “Programs”
Æ
“EagleEyes” to go to the setting page.
STEP2: Click “NEW DEVICE” to add a connection set, and key in the information necessary for DVR or
network camera remote access.
Create New Connection Set
Edit Connection Set
Connection Set Created
1. Name
Give a name for this connection set.
2. Transfer Method
Select TCP or UDP.
3. IP Address
Enter the IP address of the device you want to connect.
4. Port
Enter the port number used by the device you want to connect.
5. User Name
Enter the user name used to access the device you want to connect.
6. Password
Enter the password used to access the device you want to connect.
7. Stream Format
Select MPEG4, JPEG or H.264 (if available).
8. AV Option
Select VIDEO, or VIDEO / AUDIO.
STEP3: Make sure the information above is correct, and confirm the connection set to save the setting, and at
the same time, you will return to the previous layer.
STEP4: Select the connection set you just created to start connecting to the device you want.
