TL-SC3000
3GPP Surveillance Camera
44
NO.
Function
Description
Audio On / Audio Off
Choose the audio function: On or Off.
(This audio function is only for AVI202 and AVI212
model)
Static IP / DHCP /
PPPOE / DDNS
In the “Network” page, you can set the network
configuration of the network camera. For details,
please refer to “Network” section of the Video
Viewer on Page 29.
SNTP
Set the SNTP (Simple Network Time Protocol) for
the time setting. For details, please refer to “SNTP”
section of the Video Viewer on Page 27.
FTP
Assigned a specific FTP site for the motion/alarm
notification function. For details, please refer to
“FTP” section of the Video Viewer on Page 34.
2 Network
Assigned a specific email account for the
motion/alarm notification function. For details,
please refer to “MAIL” section of the Video Viewer
on Page 34.
Snapshot Path
Set the location where the snapshot pictures are
saved.
Frame Rate
According to the bandwidth, set the required frame
rate (FULL / HALF / ONE THIRD / QUARTER / ONE
FIFTH / ONE TENTH / ONE FIFTEENTH). For
details, please refer to “Video” section of the Video
Viewer on Page 35.
System Type
Set the system type of the connected network
camera (NTSC / PAL).
Stream Format
Select the stream format of the network
transmission (MPEG-4 / Motion JPEG).
Maximum Exposure
Limits
To compensate for the lighting conditions, the
maximum exposure time can be adjusted. For
details, please refer to “Video” section of the Video
Viewer on Page 35.
Detection
Motion detection is used to generate a motion
trigger whenever a movement occurs in the video
image. Set the motion detection area. For details,
please refer to “Motion Trigger” section of the Video
Viewer on Page 22.
Motion Sensitivity
Level
Set different motion sensitivity level according to
different application. For details, please refer to
“Motion Trigger” section of the Video Viewer on
Page 27.
3 Camera
Color Setting
Adjust the brightness / contrast / hue / saturation for
the network camera. For details, please refer to
“Color Setting” section of the Video Viewer on Page
19.
Language
Support English / Chinese language for the web
interface.
5 General
Mac Address
Display the MAC address of the network camera.
For details, please refer to “General” section of the
Video Viewer on Page 24.
