TP-Link TL-SC3000, User Manual

Page: 33 / 60

TL-SC3000 3GPP Surveillance Camera
28
Function Description
Sensitivity Set the detection sensitivity:
0 ~ 9
，
the higher the number, the lower the sensitivity.
Motion Detection
Setting Area Set the motion detection area by selecting the area grids with your mouse. Pink
grids represent the area that is not being detected while the transparent grids are
the area under detection. You can set multiple areas under detection.
Select All
Click “ ＋ ” (Select All) to set the whole area under detection.
Clear All Click “
－
” (Clear All) to set the whole area undetected.
Apply After setup, click “Apply” to confirm.
¾
Notify
In this section, you can select to enable the function of E-mail and/or FTP notification.
Item Description
Method
·
Email
If the E-mail notification function is activated, the network camera will send the
captured video clip to the assigned E-mail address(s) once motion-trigger or
alarm-trigger recording happened.
·
FTP
If the FTP notification function is activated, the network camera will upload the
captured video clip to the specified FTP site once motion-trigger or alarm-trigger
recording happened.
Video Type Display the video type of the notification files. The video type will vary according to
the setting of “Stream Format” in the “ ” (Address Book) page.
Total Time If you’ve set the video type as MPEG4, you can set the record time of the notification
video clip as 1 ~ 5 seconds.
If you’ve set the video type as JPEG, then this option stands for 1 ~ 5 images.